Cleaning your carpet with steam is the most thorough method available. In contrast to other cleaning processes like dry cleaning, you can see where the filth goes. It drives away from your house in the truck. The steam cleaning method employs the time-honored method of soaking, agitating, and rinsing with steamy hot water. That’s all done. The dirt and stains are extracted and stored in a holding tank in the truck, rather than being dry cleaned. The chemicals and filth are left behind because dry cleaning just soaks and agitates. It’s missing the entire rinsing and extraction procedure. It’s the equivalent of soaking your clothes in detergent and then hanging them to dry without rinsing. Would you put them on? I’m not one of them.
Carpet Steam Cleaning’s Purposes
So, how does it function in practice?
1. The carpet is checked and treated with the proper solutions before installation
2. If heavily filthy parts require scrubbing, they are scrubbed.
3. The pre-conditioners are given sufficient time to dissolve soils and stains.
4. The hot water rinse is the most important step. The 180-280°F water is sprayed at 600 psi and extracted immediately. This process flushes the dirt out and completely removes it from your home, while the heat naturally sanitizes your carpet and leaves virtually no residue.
5. Finally, a carpet rake is used to groom your carpet, lifting the pile and allowing for quick drying times.
6. When truck-mounted units are used, the heat output is increased, and only the hoses and wand are brought into the house. In addition, the drying time is reduced to around 2 hours.
Shaw Carpet, Mohawk Carpet, and many other carpet manufacturers recommend steam cleaning. Shaw and Mohawk are two of the most well-known manufacturers, and steam cleaning is the only way to keep their warranties valid.
Cleaning a Carpet with Steam
The carpet steam cleaning process uses a simple scientific phenomenon to ‘deep clean’ the toughest dirt by drawing it to the surface and wiping it away before it stains. Use a liquid-based cleaning agent that can be vaporized or turned into steam, a ‘steam cleaning machine,’ also known as a ‘carpet extractor,’ and a vacuum cleaner to steam clean a carpet. A mild solution is always a good choice because it is safe for both the carpet and the person who is using it. Use self-contained extractors with built-in vacuum cleaners when it comes to machines or extractors. Alternatively, start with the extractor and then move on to the vacuum cleaner.
After you’ve decided on a cleaning solution, read the user’s manual for instructions. Then, as directed in the user’s manual, move the extractor over the carpet surface, gradually covering all areas of the carpet surface. The extractor uses steam or vapors to inject the cleaning solution into the carpet, causing dirt to rise to the surface. This procedure can be completed in a matter of minutes, or even seconds, depending on the machine. The dirt is then extracted using high-pressure air by the extractor. The carpet is vacuumed after extraction to ensure that all dirt is removed.
What are the benefits of carpet steam cleaning, commonly known as extraction?
Carpet steam cleaning, also known as extraction, is a popular method for deep cleaning carpets. It not only cleans the surface of the carpet, but it also cleans the carpet base and fibers. Choose extractors with powerful motors or those with less powerful motors based on your budget and requirements. Choose the tools that will be most useful, such as brushes and cords.
Best Practices for Carpet Steam Cleaning
Steam cleaning is one of the most effective cleaning methods for carpets. This is a perfect idea to make your carpet extra clean and beautiful. However, before start to steam clean your carpet, it will be better for you to read the information in this article well. Here, you will get some general but effective tips in doing steam-cleaning process to return the beauty and the cleanliness of your carpet perfectly.
Carpet Cleaning and Stain Removal Techniques
Let us talk about the techniques. There are several basic techniques that you can do in removing dirt and stains on your carpet. They are:
Treating the Carpet
Vacuuming your carpet is something you should do before steam cleaning this kind of flooring accessory. It is very useful to help you remove the loose dirt that is hidden on your carpet. Then, the carpet with the highly soiled condition needs to be sprayed with cleaner. It will be very useful to help you remove dirt, grease, or soil. Therefore, you can steam clean your carpet easily without any hard effort.
Preparing the Device
Now, you can prepare your steam cleaner with its soap or shampoo. Start to clean the carpet from a certain corner, and it will be better for you to work toward the hard floor. Therefore, you do not need to walk on the wet cleaned carpet. Besides, keep in mind that you need to move your cleaner slowly since this device needs to move slower than a dry vacuum. Let the cleaner suck the dirt and grease up from your carpet. If your carpet is extremely dirty, you need to repeat your cleaning process once or twice, depending on your need.
Steam Cleaning Machine
Now let us talk about the equipment. Steam cleaning machine is a certain cleaning device for carpet and other upholstery that offers you more features and a stronger vacuum. If you have children and pets, you need to provide this product in your home.
Besides, it will be better for you to choose a certain product that allows you to heat the water while it is running. It allows you to save more time since you do not need to add more hot water in your tank frequently. Besides, it is also better for you to choose a product that uses very hot water instead of another one that uses warm water. It helps you in carpet steam cleaning faster.